Stand for Alice keyboard (or similar)

Edit (13/2/2023): Here's an updated version which I personally use and recommend:

https://www.printables.com/model/397621-stand-for-alice-keyboard-or-similar-v2

Heavy duty design for keyboards with substantial weight.  Bottom of keyboard is 68 degrees from horizontal for good weight distribution and smaller footprint.

Originally designed for Ashley keyboard, with 12-deg key rotation and 7-deg typing angle.  Should also be suitable for Alice (10-deg key rotation and 8-deg typing angle) and similar keyboards.

To prevent damage to the keyboard or desk surface, use of anti-slip rubber strip on the finished print is highly recommended.

Print parameters:

• Print with the long side on bed (see picture)
• Material: PETG
• Layer height: 0.2mm
• Perimeters: 2
• Infill: 20% gyroid

Disclaimer: Files provided as-is. Author does not guarantee suitability of files for the purpose. Author not responsible for any injury or damage of property resulting from the use of the files.