Lazy Printer's Fume extractor for 120mm PC fans

0 reviews

unipear

@unipear

This one doesn't require screws and will use any power source you have lying around. It clicks in and it's stable!

5h 1m

2× print file

0.20 mm

0.40 mm

PLA

57.00 g

Prusa MINI / MINI+

487

updated November 17, 2022

Description

PDF

So, I was looking for a simple fumes extractor to use with some extra 120mm fans I had. I really wanted something simple that I didn't have to use screws or glue to assemble. I didn't find what I wanted, but I found inspiration. As you can see, I inspired myself mostly from Hasmar04 and dr.dentz's models.

Even though I used a tolerance of .23mm everywhere, this model is very tight. That's why it clicks when the fan is entered. You might have to force a bit, but once it's there, it won't move. Furthermore, with the enlarged foot, it won't even tumble.

Bring your own filter & Power source! (I used a fan connector to usb wire for mine)