Pikachu Keycap

Pikachu Keycap for your keyboard
26
92
1
780
updated March 25, 2023

Description

PDF

This is a simple keycap with Pikachu on it.

The original model comes from https://www.thingiverse.com/thing:1200732 but I converted the model to STL and oriented it in the way you should print it.

The model on the pictures was printed on an Anycubic Vyper.

  • No supports (make sure to enable bridging in Cura)
  • Layer height: 0.16mm (the lower the better, the Pikachu is pretty small)
  • Nozzle width: 0.4mm
  • Infill: 20% cubic subdivision, but anything will probably work
  • Print time: around 35 min

Tags



Model origin

The user re-uploaded this model. The user is not the original author of the model.

Pikachu Keycap
by arielchu (thingiverse.com)

License