Nerf Stryfe TMP stock

I wanted to try designing Nerf parts. Here is my first attempt. Stock has 4 pcs.

-Stockplate: connects to N-Strike Nerf end. Allows for 3/8 Flat head bolt. 4x location "nubs".
-Clips 1&2: lock the stockplate in place.
-Stock: connects to stockplate with Nut for 3/8 bolt. 4x location "indents" for added stability.

Print instructions

Printed at .2mm layer height, 20% infill.
Stock has long bridge may require supports depending on your machine capabilities.