CR-10 Smart Pro Low Profile X Axis cover

Just a low profile cover for the X axis cover that holds the limit switch.
7
46
0
465
updated August 20, 2023

Description

PDF

If you have a CR-10 Smart Pro you know the hotend cooling fan is loud.  There's a 40mm fan adapter out there for the Sprite hotend but it interferes with the X Axis cover.  Well, this keeps everything working and even adjust the alignment of the limit switch. For use when converting to a static pressure fan for the heating element on a sprite extruder.  

 

Version 1 you'll need to reuse your original hardware, M3 heat thread inserts, and as you can see in the pictures I didn't use M2 inserts to hold the limit switch.  If you have them use them, otherwise use anything else you have. 

 

Version 2 the mounting holes are reduced to 2.65mm id to give plenty of plastic to cut threads into in case you don't have the brass inserts.  I don't think it would matter if you used the inserts or not in this case. I just had them and decided to use them. 

Tags



Model origin

The author marked this model as their own original creation.

License