Prusa MK3S Lightbox

Here is my design of a Lightbox for the MK3s. The Lightbox will be connected directly to the EINSY Board and can be swtitched on or off.
The whole print won't need any supports.

Hardware needed:

• Wires
• Mini Switch (9x14mm, like this) If you need a different cutout for other sizes please let me know!
• Soldering tools
• 24V LED Strip - up to 15mm thick

Installation guide:

All screws are 3D-printed, make sure to not overtighten them!

Connect wires to Einsy Board as shown here.

Have fun with your new lightbox!

+++++++++++++++++++++++++++++++++++++++++++++++++

If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!

Happy printing!

Print instructions

• Print as aligned
• No supports needed
• Print in PETG for durability