Rigid Ignite LED bicycle headlight mount

Quick and dirty handlebar mount for a Rigid Ignite light pod.  This was designed for a 25.4mm handlebar with a significant rubber pad to keep it from slipping on the bar.  it will be slightly undersized for a 31.8 mm handlebar but may work.  It is a project in progress.  I printed out of PETG for flexibility, 0.2mm layer and support for the holes and keying feature per the included picture.  I used a ¼-20 bolt (which required slight modification to the included Rigid base).  I've been playing with either a Milwaukee 18V drill battery or a Pulse 4S 2250 mAh LiPo battery for power.