3030 Mounting Profile for Use with LACK and other Enclosures

I have designed a few printer utensils that can be mounted to the 3030 extrusions in with the Prusa Mk3S or Prusa Mini (scraper, PINDA height adjuster). If the printers are in an enclosure, getting access to the extrusions is a bit more cumbersome, so I designed this super simple profile to be mounted on the outside of a LACK enclosure. Two #6-½ or #6-¾ screws are needed to attach it to the surface.

I printed it using Prusament PETG and 0.2mm layer height, standing upright with a small support painted on. If that's not stable for you, you may tilt the model up to 45 degrees and put supports under the backside but print time and material use will be much longer. I designed clearance to be a tight fit with my 3030 tools. If your printer has different tolerances, try scaling the model up by 1% or so. 

STEP file provided.

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.