Apple Watch stand

Print settings:

• Layer height: 0.2 mm;
• Perimeters: 3;
• Solid layers - top/bottom: 5 / 5;
• Infill: 15 %;
• Supports: no;
• Material: PETG (optionally PLA).

Provided models are designed to be mounted on the right-hand side of a bedside table.
Printing of parts for left-hand side assembly is possible by using the mirror function available in PrusaSlicer.

Required additional parts:

• 3 x countersunk screws 3.5 x 25 mm (or simmilar with head diameter <= 7 mm).