PC Blend Prusa Pulley

This Pulley is universal and recommended for various purposes. Fine example is yachting. It is made from three parts and connected with M4 screw. In case you need different size, you can scale it to 125% using M5 screw, 150% using M6 screw and 200% using M8 screw. Recommended material for this Pulley is our Prusament PC blend.
Not recommended to use as safety feature.

Print instructions

How to print from Prusament PC Blend:

We recommend placing the objects into the center of the print sheet to achieve a good adhesion thanks to even heat distribution. A useful addition is the skirt (draft shield), a thin wall around the object. It creates a microclimate around the printed object and blocks air circulation.

Do you need to add the Prusament PC Blend print profile into PrusaSlicer? Make sure you’re running PrusaSlicer 2.2.0 or newer. Go to Configuration - Configuration Wizard - Filaments - PC - check the Prusament PC Blend option and press Finish. Now, PC Blend will be available in the list of materials.

Designed by Josef Franc (ropak).