BABA YAGA

My first statue is a bust of a witch called Baba Yaga. This statue is designed mainly for DLP / SLA printers.
The total height is 80mm(gray resin). The size of the skin resin figurine was reduced to 80%.
I hope you will enjoy this ugly witch ;-)

Print instructions

A sample print was made on my Anycubic Photon. I recommend printing without AA (anti-aliasing). I used Ameralabs AMD3 resin with these print parameters:
5 bottom layers
70 bottom exposure time (s)
0.03 layer thickness (mm)
4.4 normal exposure time (s)