Funnel that catches Bambu Lab X1/X1 Carbon/P1P filament waste and directs it through a desk for collection below. The funnel has a cut out so the power cable for the printer can fit through the same desk hole.
Two variants are provided, one with the funnel hole in the center, and another with the hole to the side. Each variant has hole sizes in 50mm, 60mm, 2 inch and 2.5 inch diameters.
UPDATE 2022-11-22: Added slim variants where the depth of the funnel is as close to the hole diameter as possibl.
The funnel was designed in OnShape and the document link is https://cad.onshape.com/documents/d328a4981a7b4f5ed31bca0d/w/10c6f5a7ad99f86ab7e50940/e/d3332129dc3f418d034fc4da
Slim version on Onshape at https://cad.onshape.com/documents/a4bacdc0cd7227071fa50299/w/42829e62e81ce41442d75682/e/63e8390fe0e73f5dd6345964
The author marked this model as their own original creation.