flashlight holder

flashlight holder to screw on a wall, shelf, ... This is for a flashlight with diameter of 17mm. If your flashlights diameter differs use scaling feature of your slicer.

I added a dual hole version. with single hole it could “spin”. If you don't like this behavior, perhaps try this variant. for single hole… you can add double sided tape to have more friction to prevent spinning (tht's what I done)

No special print instructions, do what ever your printer/material needs to get a strong part.

update 1.4.2023 added a dual hole variant. 

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.