Tire Marker and Profile Meter

This tire marker can be fixed under the protection cap of the tire valve to mark the tire position when changing between summer and winter tires.

The position of the tire is shown graphically to be language neutral.

Also there is a 3 mm measuring tool integrated at the end to estimate when to buy new tires.

You can print this in multiple colors by adding M600 commands at 1 mm and 1.8 mm in PrusaSlicer and change the filament manually at these points. You don't even need a MMU for this.

If you print this model, I would appreciate your feedback and likes. Please also check out my other car accessory models.