Motorized mini turntable

This is a project of a small and simple rotating table with a motor.
It is easy and quick to assemble. Only two printed parts are required, as well as a motor and an engine speed controller. As a power source, just charging from a smartphone (5-16V) can be used. The total cost of all components is about $ 3.

Print instructions

A grid on the surface of the table is formed when preparing the print file. It is necessary to set 0 lower layers, 3-4 upper layers and about 40% of the filling with a cubic pattern. To print the surface, I chose a concentric pattern, but this does not matter.
I printed with a nozzle 0.8 (this is rough, it can be seen in the photo), the layer height is 0.3, the width is 0.6. You can print better with smaller sizes.

You can use various components that are suitable in size, I bought these:
12V DC brushless motor https://aliexpress.ru/item/32819069437.html?spm=a2g0s.9042311.0.0.264d33edxKzbwx
5V 12V 10A PWM DC motor speed controller https://aliexpress.ru/item/32840532022.html?spm=a2g0s.9042311.0.0.264d33edxKzbwx