Rear wiper cover for Alfa Romeo Mito and Peugeot

I lost the rear wiper cover for my Alfa Romeo Mito and needed a replacement. It looks like a common design for various car brands and might also fit for others (not tested). I am happy for feedback and like to hear if this fits (or not) for other brands as well.

Compatibility

• Alfa Romeo Mito
• Peugeot

Print settings

• Layer Height: 0.2mm
  • Use variable layer height for smoother top surface.
• Perimeters: 3
• Infill:
  • Density: 100%
  • Pattern: Rectilinear
• Brim (optional): 5mm
• Supports: Everywhere
• Suggested material: PETG, ASA

Depending on your surface stickiness you might need to add a brim (I like to use 5mm).

The bottom of the model is slightly tilted, therefore you need to lay it flat.

For a cleaner looking top surface, use the variable layer height. I used 0.15mm for the top layers (green) and 0.2mm as default layer height (gray).

Print time (estimated)

Prusa Slicer 2.5.0

• 0.6mm Nozzle: 1 hour
• 0.4mm Nozzle: 1 hour 30 minutes