Rotating toy similar to gyro - Print in Place
This was originally a test I made for printing moving parts in place, which turned out to be a fun toy.
12
79
2
301
updated November 9, 2022
Description
PDFTo print this you printer has to be able, to cleanly print the 0.2mm gap between the rings.
Print settings:
- no supports needed
- printed in PLA, but other material should work
If one of the rings does not rotate well, you can press it together from the outside, while rotating a few time, to loosen it up.
Tags
Model origin
The author marked this model as their own original creation.
