Prusa Printer - Prusa Mate!!!

A cute little Prusa Printer to sit on your desk that's guaranteed to make you smile every time with his startled grin. Prusa Mate is simple fun cartoon version of a Prusa printer.
You'll need glue for the assembly and a number of the parts will require supports. The file names specify which colors are required and if color changes are needed.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

Happy Printing.

Neil

Print instructions

I printed all the parts at 0.15mm layer height apart from the Little Tiny Benchy which was printed at 0.10mm.

All the parts will require gluing together. I recommend gluing the nozzle section first before attaching the hotend to the frame. Its a little awkward that bit.

Color changes are required, but these parts don't take long to print.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

I printed this quite small as I was running low on filament. But you can scale up if you keep all parts uniform.

Updated 09/05/2020
The Benchy was designed by Creative Tools. For more information about the Benchy and download link please visit http://www.3dbenchy.com/

Please refer to the images for assembly instructions and if you have any problems, please give me a shout.

Happy printing,

Neil :-)