Simple Foldable Phone/Tablet Stand - Print in place

Simple Phone/Tablet stand, that is foldable. This is meant to print in place and will need some small supports, tolerances should work if you scale up or down +-30%.

Enjoy!

Edit 1: Added V2 which is bigger and should be able to fit bigger/heavier phones and tablets. still will need small supports

Print Settings

Printer:

Odin 5 F-3

Rafts:

No

Supports:

Yes

Resolution:

100

Infill:

25

Notes:

Use at least 3 walls to make sure it's sturdy. Infill recommended is at least 25%. Print with supports, use line or zig zag at a 10-20% density.