Adjustable cheek riser and extended and raised rail for SLAB Nerf blaster. Also, ported muzzle.
57
196
3
2956
updated November 8, 2022

Description

PDF

Adjustable cheek riser for SLAB. Not ambidextrous- to make left handed, mirror everything except screw lock, locklugs and nut. Extended rail and ported muzzle, too. Only those parts included- for the full blaster by Sillybutts, go to: https://github.com/Sillybutts/SLAB

Hardware: 10 4-40 screws (if you've already got your SLAB built, you'll need 6 extra over the 4 you've already got in your stock panel A). Everything should be good at 20% and 5 walls, except the screw block, which should be done at 100%. Assembly: screw nutlock into mountblock, gap downwards. Make sure the holes line up. Screw screwblock into riserpad. Pay attention to which side goes forwards. Insert the nut into nutlock/mountblock, insert screwblock posts into that arrangement, and lower it down by turning the nut. You may want to print the nut at 105% scale if it's tight, and may want to lube the screw for easy adjustment. Once the screwblock is most of the way down, drop the locklugs into the holes in the mountblock from the bottom, and screw them into the screwblock posts. Then just attach the mountblock and the cut down stock panel included to the SLAB stock core.

The extended rail pieces just replace rail A and B from the SLAB fileset. The ported muzzle just screws onto the barrel nut just like the SCAR or barrel cap.

Tags



Model origin

The author remixed this model.

License