WorkBee CNC router shop-vac dust shoe

A dust shoe for the De-walt (Probably fits others) router on the Workbee CNC router.
Requires 8 x 8mm Neo Magnets, 2 x M10 bolts (or threaded bar), 2 M5 bolts, and a brush strip.
The 2 M10 bolts or bar are for locating pegs, the screw into the upper shoe and protrude down, the lower shoe locates over them to prevent any twisting.
The 2 x M5 screws should be gently tightened onto the router, the upper shoe is a tight fit on the router, it will need some pushing on, then the two M5 screws hold it in place, they only need to be gently tightened.
Magnets should be superglued into the 8.2mm holes. - Make sure you polarize them correctly or fitting it could be amusing-.
Brush strips (available online from most big general tools retailers) - Also available from Ooznest, can be glued into the lower shoe.

Print instructions

2 x G-code files, one PLA, one PETG, just print the one you need.