Drawer Pull "Clamp"

Embrace the asymmetry.  The PETG Prusament Clamp is such of a nice model and it also makes a nice handle too.  The prusamentpet_frame was customized to add a mating feature to the base plate for strength.  I also flipped the logo to show upright when mounted.  Otherwise, it uses the prusamentpet_screw and prusamentpet_jaw from the deriving model.

Printed with Prusa Galaxy Silver PLA and Overture Sparkle Blue PETG with 0.4 nozzle and 0.2 layer height and 25% grid infill.  I used a tiny bit of support on the baseplate boss feature.  I printed all parts at 100%, but feel free to scale the threads radially if your machine needs greater tolerances.

Assembled in place by threading the screw through the base and the handle then snapping the jaw into place.  Run the screw down until it's just about touching and the handle moves as freely as you want it to.

Thank you and happy printing.