this is a quick connect i designed for changing back and forth from the stock wheel and the following 3d printed f1 wheels
https://www.thingiverse.com/thing:4177079
https://www.thingiverse.com/thing:3889532
the base must be printed at 45 degrees to give the needed strength to the threaded area, the f1 wheel required the spacer to be added to it to tighten down securly also you may need to add something to the back of the f1 wheel to add to its traction, i used some spray on rubber in the contact area.
the cut guide in these files is for marking and cutting out the original g29 wheel to fit over this connect
also the g29 wheels will need some grinding to add clearance for the thumb wheel
The author hasn't provided the model origin yet.