Dominion Token Boxes

These boxes are the size of a dominion card and the height of the slot in the plastic tray that comes with your expansion. Since the boxes are the same size as a stack of cards they should also fit in most other Dominion organizers. Each box has the symbol for its token and blank boxes of each size are included.

I have created token trays for all Dominion expansions that use tokens through Allies.

I have two versions of each tray, Regular and Silk/Multicolor.
The regular version has embossed token symbols while the Silk version uses the unique properties of the silk sheen to embed the symbols in a completely smooth surface. Alternatively you can print the Silk version on your MMU/Dual nozzle printer for a two-tone container.

The SOLIDWORKS file is attached, and I will upload .STEP files when I get around to it or upon request. 

Expansion Guide:

• Seaside: Tall Coin Tray, Embargo Tray (1ˢᵗ edition only)
• Prosperity: Prosperity VP Tray , Short Coin Tray
• Mixed Box (Guilds): Tall Coin Tray
• Empires: Empires VP Tray, Debt Tray
• Renaissance: Tall Coin Tray, Wooden Cube Tray
• Allies: Tall Coin Tray

Printing Notes:

• Regular Files:
  Use 2 perimeters for VP boxes, 2 or 3 perimeters is adequate for everything else
   
• Silk Files:
  If you have gaps in the symbols, or if it does not show up when slicing with Prusaslicer/SuperSlicer changing the number of perimeters for the symbol objects will usually fix it.
  • Coin, Embargo, Debt: 
    • 5 Perimeters on the outer Symbols is a good width. Set the Tray/Lid to 2 and the symbol to 3 perimeters or vice versa
    • Print the interior symbols with 2 perimeters max
  • VP Trays: 
    • Print the Lid and Tray with 2 perimeters.
    • Print the  VP Symbols (inside and out) with 1 perimeter for the best results.
       
• Wooden Cubes: (Both regular and silk) 
  Set icon perimeters to 1 and set icon infill angle for wood look: Top 0°, Left 35°, Right 150°
  • Lightly sanded Wood filled filament (Eg Hatchbox Wood PLA) accepts Stain pens quite well and can make cube icon pop! Regular 3d model recommended for use with Wood filament.

Also see post on Thingiverse! Likes would be appreciated https://www.thingiverse.com/thing:5645411

Looking for even more Dominion organization?

These token boxes are also compatible with Henry's 3d printed organizer insert for your sleeved Dominion cards.  Check them out here: https://www.printables.com/model/468636-dominion-box-inserts