SRAM Large Bleed Block - For SRAM Code Brakes

This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes.

DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8 calipers with a very small adjustment. The only required change is to reduce the height (Z dimension) from 12 mm to 11 mm – all other dimensions remain the same and fit the DB8 caliper properly. You can do this either by editing the STL or scaling only the Z axis in your slicer.

Printing Instructions

Rafts: No

Supports: Yes

Resolution: 0.20

Infill: 50%

Wall Count: 4

Top/Bottom Layers: 4

Filament material: PLA