keebcu - andimoto75Q1 iso

This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a 75+% Q1 Layout mechanical keyboard which can be printed on smaller printers such as Prusa Mini. 75Q1iso means 75% size with Keychron Q1 style keyboard with ISO layout.

This model additionally has a top frame to hide the switches. This gives a nice clean look.

If you want to build the complete keyboard at once, I added the complete models also.

This design uses an Teensy2 as controller. If you want some customizations, check out the repository and modifiy the keyboard files or build yourself a custom one.

OpenSCAD files and documentation: https://github.com/andimoto/keebcu

Wiring Diagram can be found here:

https://github.com/andimoto/keebcu/blob/develop/wiring_sheets/andimoto75Q1-iso/andimoto75Q1_iso_teensy2_wiring.pdf

Firmware can be found here:

https://github.com/andimoto/keebcu/tree/develop/qmk-builds/andimoto75Q1-iso

Firmware Sources can be found here: 

https://github.com/andimoto/qmk_firmware/tree/andimoto-keyboards/keyboards/andimoto/andimoto75Q1iso

You need:

• keyboard case (left & right or complete)
• lid (left & right or complete)
• frames
• risers
• cherry mx style switches
• fancy keycaps (for this the Q1 iso keycaps fit directly)
• costar stabilizers
• glue
• wires (thin)
• 1N4148 diodes
• 12x m3x8 screws
• 20x m2.5x8 screws for the frame

I also added the complete model which can be printed on bigger printers. Keyboard is 325mm in length.

If you have questions write me!

Have fun building it!!