Functioning 1/10 Scale RC Jack Stand - version 2
A replica of Harbor Freight Jackstands for RC Cars
376
1913
27
4857
updated
April 13, 2025
Makes
Comments
Works good
They look great and I love the Beetle!
Really cute model. Using it to hold up my RC car when I’m fixing it. Parts fit together nicely and it’s very durable.
Very clean! Thanks for sharing!
¡Muy limpio! ¡Gracias por compartir!
Back with the 1/16 versions, lol. They came out pretty good, had to mess with the tolerances tho, especially on the handle. Also if anyone else wants to make this at this scale I recommend a smaller than 0.4 nozzle, it'll come out and work much better. I used 0.25 for everything besides the red body
@3DBirdy Impressive. I did not take any tolerances/clearances besides 1/10 into consideration. I figured scaling up would be a relatively simple task, but smaller, bravo.
Works very well and looks great. I'll also make a couple 1/16 scale but I'll need to swap to a smaller nozzle. I'll share pics of those too
There are better models for this same thing. This just happens to be the one with the most downloads.
The fits are pretty bad and you have to guess the inclination of the handles.
Also the orientation of the 3d models are not correct, if you print it upside down (with brims) you should be able to print this without supports, which seems more 3d printer friendly.
They are okay, could be better, for such a simple thing. But they nail the vibe.
@Mattia_706386 What printer did you use? I my tolerances have varied over 4 different printers. Mine work great and other people have had good results. I am happy to help you with yours and maybe I can scale some things for different tolerances and post them here. My guess is the pivot or the arm could be scaled for different printers to make a better fit. Let me know which parts are not fitting well and I can make some tweaks if you are interested.
@Angrysquirrel Bambu Lab P1S, using sunlu PLA+
View 3 more comments