Cabinet Knob

Greetings and salutations, 

This cabinet knob can be used in the bedroom, bathroom, kitchen, office… anywhere. 

Super easy and quick to print with pla, nylon, petg, abs and woodfill. It has a cavity for an M3 nut to be embedded into or you can cut the first layer away and glue the nut into place.

Print instructions:
Layer height: 0.2mm
Infill: 10-25%
Support: None
Note: You will have to add a print pause at layer 21

Print time: 30min
Filament used: 4g

This is part of my filament cabinet I've built. Below is a link to the hinges I designed and use:
https://www.printables.com/model/263096-small-hinge