Sage / Breville "the Smart Grinder Pro" Single Dose Hopper

Single Dosing tool for the Sage / Breville Smart Grinder Pro. Maybe it fits also to other machines from Sage / Breville. It minimizes the dead space of the machine to +/- 0-0.1g.

Installing

1. Install part1 like in the picture (it prevents ground coffee from entering the outer ring)
2. Install part2 with the longer “nose” in the opposite hole first. Then press it down hard on the other side. It will deactivate the Lock. To remove it you can use a knife to leverage it. 
3. Put part3 in the right place and twist it to the right side until it “clicks”
4. Screw part4 on the thread of part3 

Operation

1. Fill in the beans
2. start the grinder
3. When the grinder sounds empty you have to push part5 a few times up and down in the hopper while the grinder is still running. The dead space is emptied by the air.

Print setting

No Support

15% Infill

0.2 layer