Star Wars - Dark Trooper - 80cm

Here you have yet another 80cm filament print of a robot. This one is based on the droid “Dark Trooper” from the Star Wars series “The Mandalorian”. The original model was designed by an artist on Fiverr for me.

Since it has not been designed by me full credit goes to the artist. On this robot it is “unipixel”. Here is the link to his Fiverr account: https://fiverr.com/share/jP1Vgo

This example is printed with Amazon Basic Filament “Copper Silk” … Usually this droid is supposed to be compeltely black. But printing in very dark colors hide a lot of details … and this robot is rich of those.

To mount the parts there are holes included which fit standard 40mm long, 8mm or 10mm in diameter wooden bolts (very rarely also 30mm x 6mm if not enough room for larger ones).

I printed the files as prepared, removed the supports and glued the parts together with super glue for the surfaces and mounting glue for the wooden bolts.

For Printing a usually chooese quite strong settings since I made the experience that printing such larg figures make thin walls and low infills very fragile. But all 3mf files are included as well. So change the settings to your preferences to make the print faster & cheaper or even tougher :) …

Enjoy