I wanted to put something into the Halloween pumpkins to illuminate it from inside for longer period of time.
I came up with this simple model to accommodate 2 AA batteries and a LED.
This simple design holds together by itself, but if you have different tolerances you may add a rubber.
All you need, apart of two prints of the part, is a single LED diod and a short piece of a wire on the other side.
Print the holder twice and put batteries in the opposite direction.
In the first part insert a wire into the slot.
The second part hosts the LED contacts coming through the holes.
I suggest you to test the correct polarity prior assembling.
I've put whole thing into a plastic bag and then inserted to a pumpkin.
Enjoy :)
The author marked this model as their own original creation.