Led webcam clamp mount for Artillery Sidewinder X2 / X1

Mount your webcam or another cam to your Artillery without modifying your printer. You can just clamp it under the front left printer corner.

In addition to my previous version, here are new features:

- Fix the camera - there is a hole for a common 1/4 inch screw to mount the cam/webcam itself. If you like to print one, see here.
- Adjust the horizontal mount angle of the cam by from -10° to +30°
- Add a 12mm LED Stripe. You can combine it with the Aircookie WLED project. Even more, if you are using Klipper as your printer firmware - you can programm this LED stripe by custom g-code. See my blog post as a straight forward tutorial, how to install klipper and make the first steps. A post, how to program the led stripe may follow.
- No need to modify your printer for installation

Just print it - but make sure, your printer is calibrated well.

You can also use a common M6 Screw instead of printing this one. Mine here has a length of around 15mm.

Add another streamlined variant, more stable and not as high as this one. See here

Have fun.

I would be very happy to see your makes of that!

And feel free to comment.

Like it?

Buy me a coffee