Espresso Puck Screen Holder Stand for 58mm Portafilter

Stand or holder for your puck screens generally sized for 58mm portafilters.  This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size.   Flair58 pucks screens measure at 58.4mm dia and 1.8mm thick.

I printed this upside down to create a nice smooth surface finish on the top of the holder but you can print it right side up if you want.

Update 8/12/2023: added a variant of v3 with 0.5m slits designed to fit thinner puck screens

Update 7/25/2023: added v3 with an open bottom that is quicker / cheaper to print and has the benefit of being exposed to the heat of a cup warming tray

Update 7/20/2023:  added v2 with a center cut out and 4 slots.  This one needs to be printed right side up