M10 knob

Needed replacement knobs for the lockingbolts of my garden christmas tree stand. Designed for a in my case a M10x80 hexbolt, but will work for any M10 hexbolt longer than 25mm (the first 20mm of the bolt will be inside the knob).

Printed in PETG at 0.20 layerheight, 15% cubic infill and support on the center of the knob. I split the .3mf model into 2 objects placed apart before printing. 

Print time is about 2h on my mini.

Included are model-file in Autodesk Fusion 360 format.