magnetic Skadis Plant Shelf

There isn´t many original Skadis stuff out there. Here on 3D Sites is many more to find, but mostly practical stuff. I wanted to use my Skadis for decoration, especially for some plants. So i designed this nearly invisible Shelf for Skadis boards. The trick: some magnets allow us to reduce the shelf in its dimensions, to get a strong hold, with a slim footprint. U can also use it without magnets, butt the plants should be pretty small in this case.

What do you need?

• PETG or any stronger Material
• 4 Magnets (10x2mm)
• Glue
• maybe sanding paper
• Skadis Board

Just print everything in 0.2-0.3mm layer height with a medium dense infill.

U need two hooks and the magnets for the shelf needed to be inserted while printing. Just pause manually or put a print pause with your slicer. Insert the magnets (no glue) and let the print finish. 

The Magnet adapter plate for your plant pot needs to be glued on your pot. Lay two magnets in and then just glue it on, so that the magnets are between plant pot and the adapter. (In some cases its better to sand the pot a little for better glue adhesion.

And then your are good to go. Happy planting.