Cleaning Tool, Paint Stand

A simple early multi-tool project, printed one and used it a ton for a wide range of things. I needed something to hoist a small object but also be able to catch debris. This can be suitable for dremeling or painting of certain objects that can be mounted on the spike at the center.

It's not beautifully parameterized, but it's also so simple that most users should be able to customize as needed or replace the central spike with a more suitable stand for their project.

Common failure mode is for the central spike to fail. 

Print with low infill or modify the parameters to make the wall thin. I used to print a higher infill for more mass but a future iteration would have a spot to add weights, as when using this as a mount for whittling or sanding, it needs a desk mount and structural reinforcement vitamins for higher forces.