MAMUT DX mounts for VRGM gun stock (magnetic)

2021-01-14: V3 - even more tolerance for magnets, made some cutouts so the magnet slots are deformable

2021-01-01: V2 - increased tolerance for the magnets

Mod for VRGM v2 VR gun stock – support for Mamut DX controller grips.

The mount goes where the lace clip originally was, the lace clip is moved a little lower into the slot in the mount. It holds quite firmly and provides more comfort for larger hands.

Two versions: one for 1× 20mm × 2mm magnet, one for 4× 10mm × 2mm magnet.

I recommend using the 20mm magnet for your front hand (because it can rotate and is more easy to mount on) and the 4× 20mm version for the back hand as it prevents rotation and is stronger.

For zero effort, print the SET_RECOMMENDED_10mmRight_20mmLeft.stl file.

Source file included, also included standalone rail and cup mounts if you wanted to make your own controller support.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20

Filament: Gembird PLA Black

Notes:

Supports only from build plate