Customizable Stereographic Skull v3

This is basically the same as http://www.thingiverse.com/thing:2191384 only it has the ability to insert a LED with a cooler. It will be located in the jaw directly at the north pole of the imaginary sphere. These are the coolers I used: https://www.amazon.com/dp/B00NQ9NJCS. The LEDS are these, but similar ones will work also: https://www.amazon.de/gp/product/B00A092NY2

If your cooler has different dimensions you can adjust the size in the paramters in certain limits that do not break the design.

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

No

Supports:

No

Resolution:

0.2mm

Notes:

I printed this slower and with higher resolutions than my previous versions, this is definitely a improvement! Also supports and rafts are not necessary for this model. Printed with 45mm/s in 23h 45min.
Scaling this makes no sense as then the cooler will not fit anymore. If you don't intend to use a cooler and LED you should use version 2.