DDG Wind extruder V6 Idex Tenlog D3 PRO
DDG Wind extruder V6 for Tenlog TL-D3 Pro with mechanical leveling of the second extruder
20
62
1
877
updated October 30, 2022
Description
PDFDDG Wind extruder for Tenlog TL-D3 Pro, you can find all you need to change your printer, manual, printed parts and bill of materials.
With this mod you have mechanical leveling of the second extruder. It make with a screw in the second extruder.
You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
| CATEGORY | PART DESCRIPTION | QTY | COMMENTS |
|---|---|---|---|
| Fasteners | Screw DIN912 M2x8 | 4 | |
| Screw ISO 7380 M3x6 | 6 | ||
| Screw ISO 7380 M3x25 | 4 | ||
| Screw DIN912 M3x8 | 10 | ||
| Screw DIN912 M3x10 | 6 | ||
| Screw DIN912 M3x16 | 4 | ||
| Screw DIN912 M3x20 | 2 | ||
| Screw DIN912 M4x35 | 1 | ||
| Nut DIN985 M3 | 4 | ||
| Nut DIN934 M3 | 14 | ||
| Nut DIN934 M4 | 1 | ||
| Washer DIN125 M4 | 1 | ||
| Mechanical | NF-DDB WIND LEFT | 1 | You can buy the full set v6 24v |
| NF-DDB WIND RIGHT | 1 | You can buy the full set v6 24v | |
| HeatBreak | 2 | If you only buy the extruders it will be needed | |
| PTFE Capricorn | 1 | If you only buy the extruders it will be needed | |
| V6 Heater Block | 2 | If you only buy the extruders it will be needed | |
| V6 Nozzle | 2 | If you only buy the extruders it will be needed | |
| LM3UU Bearing | 4 | ||
| ROD 3mm 304 Lmin 110mm | 1 | ||
| Spring L20mm D8mm | 1 | ||
| Electronics | Fan 5015 24V Dual Ball | 2 | Recommended |
| Fan 4010 24V Dual Ball | 2 | You can use the original | |
| Motor Nema 17 25mm | 2 | If you only buy the extruders it will be needed | |
| Thermistor 100k 3950 | 2 | If you use 104GT you need change firmware | |
| 40W Heater Cartridge 24V | 2 | If you only buy the extruders it will be needed | |
| Misc | PTFE 2x4 | 1 m | |
| Cable Sleeve Self Closing PET 13mm | 1 m | ||
| Self-Locking Cable Ties 2,5x100 | 8 | ||
| PC4-01 Tube Connector | 2 | ||
| Printed parts | Fixed support_2 | 1 | |
| Slide_bracket_2 | 1 | ||
| Right_connection_box_clip | 1 | ||
| Right_connection_box_cover | 1 | ||
| Right_connection_box_support | 1 | ||
| Right_duct | 1 | ||
| Right_wiring_cover | 1 | ||
| Left_bracket | 1 | ||
| Left_connection_box_clip | 1 | ||
| Left_connection_box_cover | 1 | ||
| Left_connection_box_support | 1 | ||
| Left_duct | 1 | ||
| Left_wiring_cover | 1 |
Tags
Model origin
The author marked this model as their own original creation.
