Lycoris Recoil Takina M&P 9

This is a remix of a model from: https://sketchfab.com/3d-models/smith-wesson-mp9-88681ea19a554a59a83ce8ac4e5dff25 by Mr Stickman. All I did is reinforce the end of the barrel to accomodate my custom lug suppressor system.

The suppressor is remixed from https://www.thingiverse.com/thing:841060

In the show, Takina is shown to use the gun mostly suppressed but occasionally unsupressed. Somehow in that scene, the gun doesn't have any threading where the suppressor is supposed to attach. For this reason, I use the quick change system so cosplay pictures will always be accurate.

Both the lug and the threading are tightened by turning them clockwise while the gun is pointed away from you. You can also use the gun as a sort of wrench to remove the lug from the suppressor if you turn it counter-clockwise.

Print Settings

Printer brand:      Printer:           Supports:    Resolution:   Infill:        Filament material:

Creality                Ender 3 Pro    Yes               .2                   40-60%  PLA+

Notes:

Models were printed with the barrel pointed straight up with a brim adhesion

I added a suprtessor lug cutout.