Ghost Kawai

cute design

This was printed on the Kobra 3 Max not S1 (option not available) Scaled up to 300%. No issues except a failed support (dirty spot on my build plate) Great file!!!

Printed on my P1S Combo using Polymaker PLA Wine Red, Black, Sunrise Orange, Pumpkin Patch Orange, Ghastly Purple and Slime Glow Green, eSUN PLA White and Generic PLA Silk Gold. 0.2 layer, 3 perimeters, 15% Crosshatch Infill. Printed for the Monday Makes segment of the LM Show (Twitch stream by @LoyalMoses ).

Printed on a Bambu Lab X1C with Bambu PETG Clear, Black, Red, Yellow, and a Darkmoon 3D G10 build plate.

I used a modifier to set the wall loops to maximum to remove infill from the ghost. I should have not disabled the fans as the bottom of the print was rough. Needed more purge around the eye layers too. The rest turned out nicely. (edited)

Great model! Little one is stock model, i thought they were too cute not to turn into spooky magnets!!

Added my own belt to the STL. I like the design!

I don't see the purple 'belt' around the hat in the STL, is it supposed to be there?