Filament sensor for E3D Hemera - Prusa MK3s mod

Description:

Filament sensor for “address change” Hemera upgrade for Prusa mk3s.

This mod reuses the original parts from the Prusa mk3s filament sensor.

Part list, Instructions/assembly guide can be found in the link below:
https://ratrig.dozuki.com/Guide/Filament+sensor+for+E3D+Hemera+-+Prusa+MK3s+mod/169 

Part list:

3D printed parts:

1 x adapter-printer (reused from the original filament sensor)

1 x fs-lever

1 x fs-cover

1 x fs_housing_front

1 x fs_housing_back

1 x fs_cover_back

Reused parts / bought parts

1 x IR filament sensor (Reuse from Prusa filament sensor)

1 x PTFE tube - about 30 mm (In the sparebag)

1 x Magnet 10 x 6 x 2 mm (Reuse from Prusa filament sensor)

1 x Magnet 20 x 6 x 2 mm (Reuse from Prusa filament sensor)

1 x Steel ball (Reuse from Prusa filament sensor)

8 x DIN 562 - M3 - square nuts (There should be 4 in the spare bag and maybe you can salvage some from the old fs sensor)

2 x ISO 4762 - M3 x 25 - bolt (Not in the spare bag, hope you have some)

2 x ISO 4762 - M3 x 20 - bolt (In the sparebag)

1 x ISO 4762 - M3 x 14 - bolt (In the sparebag)

1 x ISO 4762 - M3 x 10 - bolt (In the sparebag)