Fix broken SD Card (3d-print plastic hull)

Use this sd card hull if your sd card has physical damage and is unreadable or not recognized by the pc.

A while back the plastic hull of my sd card broke and it was no longer recognized by the pc. Using this model I was able to put the pcb inside the sd card inside the 3d printed hull and I was able to save all my data.

INSTRUCTIONS
Remove the pcb from the damaged sd card(Picture 2). Place it into the 3d printed part and secure it with one drop of superglue on the back (Picture 3). Secure the second 3d printed part in place using a second drop of glue (Picture 1). Do not use too much glue. If your printer has problems printing fine detail clean up the part using a sharp knive.

Visit my Blog for more projects like this one!
https://blog.hirnschall.net

Print instructions

If possible print with "single extrusion walls" enabled.
Use "high quality" print settings and PLA for best results.