Crochet Scrubby Dispenser

INTRO

My wife is into crochet and started to make our own kitchen scrubbies out of toile ribbon. It's a pretty standard pattern (like this Video). So I designed this up in Fusion 360 so we would have a fun dispenser. The scrubbies were 20 mm tall and had an 80 mm diameter. I hollowed out the base so sand could be added for weight.

Printer Settings

Supports: Yes

• Body: you only need support for the opening 
• Base: I had the legs in the air and use tree supports to make it all the way up the legs. but you might not need them 

Infill: 10-100% 

• Body: 10% or 20% you will want to make the top lighter so it won't be to top heavy 
• Base: I did 100% to give the base as much weight as possible. 

Assembly

1. Glue the pin into the base
2. And sand into the base. make sure the sand isn't poking above the rim
3. Apply glue to the rim of the base
4. line up the pin and the legs then hold down tell dry