Medium Heavy Duty Wire Cube Hook

I wanted to hang a large wrench on the outside of a wire cube, but it's usable for other things, obviously.

Two versions:

Medium HD Hook - Standard Model

Medium HD Hook No Chamfer - Will print easier if you have bed adhesion problems.

I have uploaded a few other wire cube hooks:

Small Light Duty Wire Cube Hook - https://www.printables.com/model/304486-small-light-duty-wire-cube-hook

Small Heavy Duty Wire Cube Hook - https://www.printables.com/model/304483-small-heavy-duty-wire-cube-hook

Large Heavy Duty Wire Cube Hook - https://www.printables.com/model/304484-large-heavy-duty-wire-cube-hook

Wire Cube Hammer Hook - https://www.printables.com/model/311569-wire-cube-hammer-hook

Print Settings

Printer Brand:
Creality

Printer: 
Ender 3

Rafts:
Doesn't Matter

Supports: 
No

Resolution:
0.24mm

Infill: 
100%

Filament: Overture PETG Black

Notes:
Material doesn't matter, as long as you only use indoors. If used in a garage or shed, something that can handle higher temperatures is recommended. I use PETG for most of my prints now.

Should import into your slicer in the proper orientation with the side down. Support on build plate only. Use a brim of 5 or 6mm to help hold the part to the bed.
 

Category: Organization