Also available on MakerWorld! Model 41379. Come join the party!
Yet another version of the Bambu Lab X1 (Carbon) bed holder, this time with 2-8 slots (your choice), and with tapering on the slots to make it easier to insert the beds. Also, the middle section is a separate part that can be sliced as open infill so that the honeycomb prints more efficiently, or you can choose a different pattern. The edges of the middle section are chamfered a bit to capture the infill. The optional “tongue” is a stabilizer that slides under the printer if you're placing it next to the printer.
Thanks to all the designers that came before me in the evolution of this design.
I've included a Bambu Studio 3MF for the 6-slot version with the Tongue, but if you want to slice it yourself in Bambu Studio:
On the Bambu Lab X1 (Carbon) the larger (more slots) versions barely fit, so you'll need to rotate 135 (or 315) degrees on the Z axis, and disable Flow Calibration when you send the print, otherwise the flow lines will be stuck to the bottom of the model.
If you really want to make the 8-slot version fit with Flow Calibration:
The purple print in the pictures is a previous version with 6 slots and a 2-inch tongue instead of 1-inch, and the infill goes a bit under the towers instead of ending short of them. I really should upload new pictures.
I've included the Fusion 360 file for remixing or changing the number of slots. You should be able to edit the rectangular pattern in the main sketch, and a couple other tweaks. Make sure to export just the Bridge body, and the Towers and Rails body with or without the Tongue body. If you want the Tongue, it must be exported in the same file as the Towers and Rails so it's one part and will print as one part for strength. I'm a Fusion beginner so don't judge too harshly.
The author remixed this model.
Various options for number of slots, tapered slots for ease of insertion.