Ender 3 - Improved Cable Chain for all Axis

This Cable Chain does not limit any movent range of the Printer.

I upgraded my Ender 3 and the following amount was needed:

• x-Axis: 12 Chain Segments and Clips
• y-Axis: 14 Chain Segments and Clips
• z-Axis: 25 Chain Segments and Clips

This will improve the movment and do not cut the cables badly.

The Chain Segments and Clips should be printed at least with PETG. ABS or ASA would be recommended. 

Filament: PETG, ABS, ASA

Layerheight: 0.2mm

Walls: 1.2mm

Infill: 20%