Motorola TalkAbout SX700 Walkie Talkie Antenna Replacement
The Rubber antenna becomes brittle and crumbles, so I modeled this replacement, you can just print and replace it.
8
104
0
1098
updated
October 24, 2022
Description
PDFPrinted using Black MG95 ABS
| Layers | 0.2mm |
| Walls | 2 |
| Top/Bottom | 5 |
| Infill | 15% Gyroid |
| Bed Adhesion | Brim (3mm or 5mm) |
| Supports | Yes (Touching Bed only) |
PS: You need to add a “support blocker block”. Resize and move it to cover everything above 7mm so you don't have to clean up supports in the inside.
In case you forget to block supports, you can use a drill bit to clean up supports inside.
Tags
Model origin
The author marked this model as their own original creation.