Valve Steam Deck Dock - Adapter for Dbrand Killswitch Case - Killdock

Details:

Dbrand's Killswitch Case does not fit the official Steamdeck Dock. With this adapter you can keep the case on the deck and still use the official dock.

NOTE: The official Steamdeck Dock cable does not fit into the Killswitch case's charging port. I cut away some of the rubber around the charging port to allow it to seat fully. This is optional. Alternate method is to use a USB-C Extender (adapter or cable).

dbrand official adapter

• Printables - https://www.printables.com/model/411302-project-killswitch-steam-deck-dock-adapter
• Thingiverse - https://www.thingiverse.com/thing:5620467

Printer Config:

• Supports - No
• Rafts - No

Hardware Assembly:

hardware required:

• Double Sided Tape (Optional)
• File
  • Due to printer tolerances, fine tuning my be required. 

1. Take the left piece and the base and snap them together, please not the slit in the base should be pointed down, see photos.
2. Then attach the right piece.
3. Optional - Glue the double sided tape into the provided space in back support. Center the whole thing on the dock.