Steam Deck - Official Valve Dock Adapter for SPIGEN rugged Armor Case

This is my Remix  to get the spigen Rugged Armor  PERFECT FIT on the dock.

I dont plan to do a “tool free version”  ,   cause I feel you need the m3 screws to adjust preassure and get all firm and secure to the original Dock.
 

From original creator with the killswitch version
https://www.printables.com/model/294788-steam-deck-valve-dock-adapter-for-dbrand-killswitc

Hardware required:

• 2 x m3x14mm bolt
• 2 x m3x16mm bolt
  • if not using clamps, replace with 2 x m3x14mm bolt
• 4 x m3 nut

How to Install:

1. Insert m3 nuts into the slots at each end of the bridges, oriented similarly to the slot wall shape. 
2. Sandwich bridges between dock inserts, screw M3 screws through insert holes and into the nuts in the bridges. 
3. If using clamps, sandwich inserts and bridges between clamps and screw thru clamps into insert/bridge sandwich (see photos).